Coverage Ratios Beyond DSCR: Debt Yield, Interest Coverage and LLCR
Coverage ratios go past DSCR. See how debt yield, the interest coverage ratio and LLCR read the same rental loan, with worked numbers on a $500,000 example.
By the DSCRLoanCalculator.org team
Coverage ratios are the tests a lender runs to see whether income covers debt, and DSCR is only one of them. Debt yield, the interest coverage ratio and the loan life coverage ratio measure the same loan from different angles, so a deal can pass one and fail another.
A residential DSCR file usually shows a single number. A commercial file shows three or four. Knowing what the others measure tells you where a deal is thin even when the coverage ratio looks fine. For the wider family these belong to, the entry on financial ratios covers the general idea.
What are coverage ratios?
A coverage ratio divides income by a debt obligation. Above 1.0, income covers the obligation. Below 1.0, it does not. Debt yield breaks that pattern on purpose, because it is quoted as a percentage instead of a multiple.
| Ratio | Formula | What it tests |
|---|---|---|
| DSCR | rent / PITIA, or NOI / debt service | can the property pay this year’s payment |
| Debt yield | NOI / loan amount | what the lender earns if it takes the property back |
| ICR | NOI or EBITDA / interest | can income cover interest alone |
| LLCR | present value of future cash flow / loan balance | does the loan work for its whole term |
The oldest of the four is debt service coverage, which commercial lenders have used for decades. Rental underwriting borrowed it and pointed it at one house.
Why one ratio is never enough
DSCR moves with the rate and the term. Stretch the amortization or switch to interest only and the payment drops, so the ratio rises while the property collects the same rent.

Take the standard example on this site: a $500,000 rental renting for $4,000 a month, with $6,000 a year in property taxes and $2,500 in insurance. On the default loan that lands at a DSCR of about 1.20.
Put the same loan on an interest only period at a 7% rate and the monthly cost falls to roughly $3,040 with taxes and insurance, which lifts the ratio to about 1.32. Nothing about the house changed. The guide on the thresholds lenders use covers how those cutoffs get read.
That is why the other ratios exist. Each one removes a lever the borrower can pull.
Debt yield: the lender’s downside test
Debt yield divides net operating income by the loan amount. It ignores the rate, the term and the amortization completely.
Run the standard example. Rent of $4,000 a month is $48,000 a year. Subtract $6,000 of property taxes and $2,500 of insurance and NOI is $39,500, before any allowance for vacancy and repairs. With 20% down the loan is $400,000, so the debt yield is about 9.9%.
Put 25% down instead and the loan drops to $375,000, which moves the debt yield to about 10.5%.
The number answers one question: if the lender owned this property tomorrow, what would it earn on the money it lent? Floors vary by lender, property type and the rate environment, so treat any specific target as a quote rather than a rule.
Notice the mismatch in how income gets defined. A residential DSCR divides gross rent by PITIA, with taxes and insurance sitting in the denominator. Debt yield strips those costs out of income first. Same property, two different numerators.
Interest coverage and where it shows up
The interest coverage ratio divides income by interest alone. Accountants call the same measure times interest earned, and in corporate credit the income on top is usually EBITDA rather than NOI.
On the standard example, first year interest on a $400,000 loan at a 7% rate comes to roughly $28,000. Against $39,500 of NOI that is an ICR near 1.4, well above the DSCR of 1.20, because principal is not in the math.
DSCR vs ICR on the same loan
ICR is always the friendlier number on an amortizing loan. It also drifts upward every year, since interest shrinks as the balance comes down while a fixed payment stays flat.
That makes it most useful where principal is not being repaid yet: interest only bridge loans, construction draws and the early years of an adjustable rate loan. The real question on an ARM is whether income still covers interest after a reset, and ICR asks it directly.
Loan life coverage on longer holds
The loan life coverage ratio compares the present value of the cash a property should produce over the rest of the loan term against the debt outstanding today.
DSCR grades one year. LLCR grades every remaining year at once, which is why project finance leans on it. A property that covers its payment comfortably this year but faces a balloon in five looks very different under LLCR.
You will rarely see it on a residential file. It is worth knowing on a long hold with a balloon or a planned refinance, because it asks whether the loan works to the end rather than to the next anniversary.
A cousin, the cash flow to debt ratio, compares annual cash flow to total debt outstanding. It estimates how fast the debt could be repaid, not whether this month’s payment clears.
Break-even occupancy next to coverage
Break-even occupancy is the share of the year the property must be rented to cover its costs. It carries the same information as DSCR, stated in months instead of multiples.

Use the simple tab numbers. Rent of $4,000 against a $3,200 PITIA payment is a DSCR of 1.25. Divide the payment by the rent and the break-even point is 80% occupancy, or about 2.4 empty months a year before repairs.
When the payment already includes taxes, insurance and HOA dues, break-even occupancy is simply 1 divided by DSCR. A 1.20 ratio breaks even near 83%. A 1.00 ratio breaks even only at full occupancy, which is the part a bare ratio hides.
Which numbers a residential lender really runs
Most DSCR programs underwrite four things: the coverage ratio, loan to value, your credit score and your reserves. Debt yield, ICR and LLCR sit on commercial, bridge and construction desks instead.

Your personal income stays out of the file, which is the whole point of the product. The guide on why a rental loan can ignore your paycheck walks through that trade.
Use the other ratios as private checks before you apply. If the coverage ratio only clears because of a 40 year term, debt yield will say so. If it clears on an interest only period, ICR shows you what happens when principal starts.
Check your own deal
The DSCR Loan Calculator runs the coverage ratio on your rent, taxes, insurance and loan terms, and shows the payment behind the number. Change the down payment or the term there, then rerun debt yield and break-even occupancy by hand with the figures it gives you.
Frequently asked questions
What is the difference between DSCR and debt yield?
DSCR divides income by the loan payment, so it moves with the rate and the term. Debt yield divides net operating income by the loan amount and ignores both. On the standard $500,000 example, $39,500 of NOI against a $400,000 loan is a debt yield near 9.9%. Lenders use it as a downside test: what the property returns if they take it back.
What is the difference between DSCR and ICR?
The interest coverage ratio, also called times interest earned, divides income by interest only. DSCR divides income by the full payment, which on a rental means principal, interest, taxes, insurance and any HOA dues. ICR is always the higher number on an amortizing loan. It matters most on interest only and adjustable rate debt, where the real question is whether income survives a rate reset.
What is the loan life coverage ratio?
The loan life coverage ratio compares the present value of the cash a property should produce over the rest of the loan term against the debt outstanding today. DSCR grades one year. LLCR grades the whole remaining term in one number. It is standard in project finance and useful on long holds with a balloon, not on a typical residential file.
Do residential DSCR lenders look at debt yield?
Most do not. A residential DSCR program usually underwrites four things: the coverage ratio, loan to value, your credit score and your reserves. Debt yield and interest coverage live on commercial, bridge and construction files. The other ratios are still worth running yourself, because they show where a deal is thin when the coverage ratio alone looks fine.
How do you calculate break-even occupancy?
Divide the payment by gross rent. On the simple example, a $3,200 PITIA payment against $4,000 of rent breaks even at 80% occupancy, or about 2.4 vacant months a year before repairs. When the payment already includes taxes, insurance and HOA dues, break-even occupancy is 1 divided by DSCR, so a 1.25 ratio and an 80% break-even are the same fact.